Nistune Type 5 Bedienungsanleitung

TYPE #5 Hardware Installation – Nistune Type 5 boards Version 1.0 Copyright 2013 Nistune DevelopmentsModel Name Engine

Type 5 Hardware Installation Manual Page 9 of 15 • S14 SR20DE 180SX (65F00 MT only), N15 GA16DE Pulsar/Sunny, B14 Sent

Type 5 Hardware Installation Manual Page 10 of 15 • N14 GA16DE Pulsar/Sunny, B13 GA16DE Sentra ECU Move jumpers J023

Type 5 Hardware Installation Manual Page 11 of 15 4. FIT BOARD TO ECU Make sure that the socket on the board lines u

Type 5 Hardware Installation Manual Page 12 of 15 Revision History DATE VERSION DESCRIPTION AUTHOR Feb13 1.0 Initi

Type 5 Hardware Installation Manual Page 13 of 15 TERMS AND CONDITIONS Nistune Developments has performed necessary me

Type 5 Hardware Installation Manual Page 14 of 15 any negligent act, omission or wilful misconduct by you or your offic

Type 5 Hardware Installation Manual Page 1 of 15 INTRODUCTION Welcome to Nistune. The Nistune hardware and software

Type 5 Hardware Installation Manual Page 2 of 15 TABLE OF CONTENTS 1. FITTING HEADER TO ECU ...

Type 5 Hardware Installation Manual Page 3 of 15 1. FITTING HEADER TO ECU • Remove front and rear covers from the EC

Type 5 Hardware Installation Manual Page 4 of 15 Once the rear cover is removed, unscrew the top screw to remove the

Type 5 Hardware Installation Manual Page 5 of 15 • Remove solder from the pads Tip : Be careful here. Don’t attem

Type 5 Hardware Installation Manual Page 6 of 15 • Fit the 20+20 header Clean off flux with acetone or simil

Type 5 Hardware Installation Manual Page 7 of 15 2. CHANGE ECU JUMPER SETTINGS Jumpers are used on the ECU to tell t

Type 5 Hardware Installation Manual Page 8 of 15 • K11 Micra CG10/CG13 ECU Move jumper CJ22 to CJ21 Move SMD